Aluminum Foil Tape

Product Description:

The thickness above is for aluminum backing, which are standard thicknesses. The minimum thickness available is 15 microns. The maximum thickness of aluminum is 150 microns. The foil thickness can be customized.
•The minimum width available is 15 mm. Sliced roll width available (or customized): 48,50,72,75,96,100 mm, etc.
•Jumbo roll width: 1000mm, 1200 mm usable; length: 1000m, 2000m, 3000m, etc
Log roll: 1000/1200 mm x 45m or 50m
Tolerance:Thickness: +/- 0.015mm Width:+/-1.0mm Length: +/- 0.4m
•Storage: Indoor storage: -5℃- 40℃( humidity:<8 0%), cool & dry, free of direct sunlight


Product Detail

ALUMINUM FOIL TAPE PRODUCT DETAIL

DSC_3298
DSC_3293
DSC_3287
P.N. Acrylic Category Thickness Loop Tack 180°Peeling Strength Static Shear Tensile Strength
EGAWL-30 Emulsion Pure 30 mic ≥15#

≥5n/cm

≥24h ≥20n/cm
EGAWL-40 Emulsion Pure 40 mic ≥15#

≥5n/cm

≥24h ≥28n/cm
EGAWL-50 Emulsion Pure 50 mic ≥15#

≥5n/cm

≥24h ≥30n/cm
EGASL-30 Solvent Pure 30 mic ≥15#

≥6n/cm

≥24h ≥20n/cm
EGASL-40 Solvent Pure 40 mic ≥15#

≥6n/cm

≥24h ≥28n/cm
EGASL-50 Solvent Pure 50 mic ≥15#

≥6n/cm

≥24h ≥30n/cm
  • With an easy release silicon paper liner, suitable for rewinding
  • Liner type available: silicon paper, white/yellow Kraft paper, glassine paper
  • Coated with solvent based acrylic adhesive
  • Strong adhesion fit for sealing joints/seams of foil/scrim facing
  • Good aging resistance for both indoor & outdoor use
  • Heat and light deflection

Aluminum Foil Tape with Liner Applications

  • Refrigerator, freezer, cooler evaporative coil/copper tube attachment
  • Heat and light deflection
  • Vapor barrier on reinforced fiberglass duct board
  • General purpose like: patching, sealing, repair, masking, etc

SELF-WOUND ALUMINUM FOIL TAPE PRODUCT DETAIL

DSC_3305
DSC_3271
DSC_3316
P.N. Acrylic Adhesive Alumi Foil Category Thickness Loop Tack 180°Peeling Strength Static Shear Tensile Strength Polyurethane Foam Bonding Rate
EGAW-30

Emulsion

Pure 30 mic ≥15# 5n/cm ≥24h ≥20n/cm ≥60%
EGAW-40

Emulsion

Pure 40 mic ≥15# 5n/cm ≥24h ≥28n/cm ≥60%
EGAW-50

Emulsion

Pure 50 mic ≥15# 5n/cm ≥24h ≥30n/cm ≥60%
EGAS-30

Solvent

Pure 30 mic ≥15# 6n/cm ≥24h ≥20n/cm ≥60%
EGAS-40

Solvent

Pure 40 mic ≥15# 6n/cm ≥24h ≥28n/cm ≥60%
EGAS-50

Solvent

Pure 50 mic ≥15# 6n/cm ≥24h ≥30n/cm ≥60%
  • Silicone coated on aluminum foil backing for easy release on unwind
  • Coated with aggressive acrylic adhesive
  • The convective heat transfer coefficient can be up to 257 W/(m·K)
  • Multi-surface grip features, can conform the evaporator coil/cooling tube easily
  • Aluminum backing has excellent conductivity and thermal dissipation

Self-Wound Aluminum Foil Tape Applications
Hold the cooling tubing tight to the  inner shell of the refrigerator or freezer until the unit is foamed, maximize cooling efficiency.
Vapor barrier on reinforced fiberglass duct board/ FSK facing
General purpose like: patching, sealing, repair, masking, etc.

LAMINATED ALUMINUM FOIL TAPE PRODUCT DETAIL

DSC_3304
DSC_3309
DSC_3306
P.N. Adhesive Category Thickness Loop Tack 180°Peeling Strength Static Shear Tensile Strength Polyurethane Foam Adhesive Rate
EGLW-15 Acrylic BOPP ≥0.07mm ≥15# 5n/cm ≥24h ≥25n/cm ≥60%
EGLW-20 Acrylic BOPP ≥0.07mm ≥15# 6n/cm ≥24h ≥28n/cm ≥60%
EGLR-25 Rubber BOPP ≥0.07mm ≥15# 7.5n/cm ≥24h ≥30n/cm ≥60%
EGLR-35P Rubber PET ≥0.08mm ≥15# 7.5n/cm ≥24h ≥40n/cm ≥60%

Description & Benefits

  • Coated with non-conductive emulsion acrylic adhesive
  • PET top layer offers good insulation between two contact surfaces
  • Good aging resistance for both indoor & outdoor use
  • PET/FOIL tape without liner ensures easy operating
  • Silicon coating on film backing for easy unwinding
  • Can be either easy hand-tear or very hard tear
  • Economical alternative to pure aluminum foil tape

Laminated Aluminum Foil Tape Applications
Refrigerator, freezer, cooler evaporative coil/copper tube attachment
HVAC, ducting work
General purpose like: patching, sealing, repair, masking, etc.

REINFORCED ALUMINUM FOIL TAPE

DSC_3271
DSC_3268
DSC_3257
P.N. Adhesive Category Thickness Loop Tack 180°Peeling Strength Static Shear Tensile Strength Elongation at Break
EGRH-215 Hot Melt PE Scrim 215 mic ≥15#

6n/cm

≥24h

≥28n/cm ≥30%
EGRS-215 Solvent PE Scrim 215 mic ≥15#

6n/cm

≥24h

≥28n/cm ≥30%
  • Coated with aggressive synthetic rubber/resin adhesive
  • Also, solvent based acrylic adhesive is another choice
  • Different facing/backing patterns, diagonal, square grid, etc
  • Extremely easy for hand-tear, easy-used by workers
  • Tear cleanly without loose thread hanging off the end
  • Rigid & flexible metal duct seams/ connections vapor sealing
  • Joining foil faced insulation panels and pipe sections
  • Fiberglass facing joints vapor sealing & other HVAC industry
  • Glass wool/Rock-wool/mineral wool/foam thermal insulation

FLAME RETARDANT ALUMINUM FOIL TAPE

_T0A2473
_T0A2455
_T0A2467
P.N. Adhesive Category Thickness Loop Tack 180°Peeling Strength Permanent Adhesion Tensile Strength Fire Rating
EGASL-30F Solvent FR   ≥15# 7n/cm ≥24h ≥20n/cm BS476
EGASL-40F Solvent FR 40 mic ≥15# 7n/cm ≥24h ≥28n/cm BS476
EGAWL-30F Water FR 300 mic ≥15# 6n/cm ≥24h ≥20n/cm BS476
EGAWL-40F Water FR 40 mic ≥15# 6n/cm ≥24h ≥48n/cm BS476

•With an easy release silicon paper liner, suitable for rewinding

•Coated with flame retardant formula solvent based acrylic adhesive

•Specially designed for high temperature, excellent fire resistance

•Good aging resistance for both indoor & outdoor use

•Aluminum backing has excellent conductivity and thermal dissipation

•Provide an effective barrier to moisture, air and corrosion

•Can be cleanly and easily removed from most surfaces, without any residue

•White goods, electronic goods internal parts holding

•Ducting work, pipe thermal insulation

•Vapor barrier on reinforced fiberglass duct board/ FSK facing

•General purpose like: patching, sealing, repair, masking, etc..

COLD WEATHER ALUMINUM FOIL TAPE

_T0A2389
01
_T0A2494
P.N. Adhesive Category Thickness Loop Tack 180°Peeling Strength Static Shear Tensile Strength Elongation at Break
EGASL-30C Solvent CW 30 mic ≥15#

6n/cm

≥24h

≥20n/cm ≥3%
EGASL-40C Solvent CW 30 mic ≥15#

6n/cm

≥24h

≥28n/cm ≥3%
  • Coated with cold weather formula solvent based acrylic adhesive
  • With an easy release silicon paper liner, suitable for rewinding
  • Specially designed for extreme cold regions, excellent weather resistance
  • Good aging resistance for both indoor & outdoor use
  • Joints/seams sealing against moisture and vapor barrier
  • Heating Ventilation Air Conditioning (HVAC)
  • Ducting work
  • Vapor barrier on reinforced fiberglass duct board
  • For use with rigid fiber glass duct board
  • For use with flexible air ducts and air connectors
  • General purpose like: patching, sealing, repair, masking, etc.

FOIL SCRIM KRAFT TAPE

DSC_3268
DSC_3257
DSC_3287
P.N. Adhesive Category Thickness Loop Tack 180°Peeling Strength Static Shear Tensile Strength Fire Rating
EGFR-170 Hot Melt FSK   ≥15# 8n/cm ≥24h ≥30n/cm BS476
  • Coated with aggressive synthetic rubber resin adhesive
  • Strong adhesion fit for sealing joints/seams of foil/scrim facing
  • Good at moisture or air penetration resistance

Good aging resistance for both indoor & outdoor use

  • Heat and light deflection
  • Provide an effective barrier to moisture, vapor, air and corrosion

Foil Scrim Kraft Tape Applications

  • HVAC industry & pipe wrap insulation

Heat and light deflection

  • Vapor barrier on reinforced fiberglass duct board
  • Joining & sealing foil scrim kraft facing laminated fiberglass blanket
  • Joining & sealing flexible air duct seams and rigid ducting.
  • General purpose like: patching, sealing, repair, masking, etc.

PRACTICAL APPLICATION

3
BOPP
25
IMG_2649
BOPP2
IMG_7302

  • Previous: Next:

  • WhatsApp Online Chat !